|
|
Post by meatloaf65 on Mar 13, 2012 11:40:49 GMT -5
can you switch a lt1 in a 95 caprice over to a carb and hei distribtor?
|
|
|
|
Post by ynotracing on Mar 13, 2012 13:17:51 GMT -5
i believe u can just not sure if the cam has the gear for the dizzy or not
|
|
|
|
Post by derby426 on Mar 13, 2012 17:17:32 GMT -5
|
|
|
|
Post by rmr85x on Mar 13, 2012 21:28:27 GMT -5
I did it last year i just got a summit brand hei and a torker 2 intake and a 2G carb and it didnt miss a beat you will just have to run a electric fuelpump because i wasnt sure if there was a lobe on cam
|
|
|
|
Post by meatloaf65 on Mar 13, 2012 23:21:45 GMT -5
so u gotta get a specail intake?
|
|
|
|
Post by rmr85x on Mar 14, 2012 13:30:17 GMT -5
Didnt have too just wanted a different one
|
|
|
|
Post by meatloaf65 on Mar 14, 2012 16:05:20 GMT -5
So I can use the intake off an older 350?
|
|
|
|
Post by rmr85x on Mar 14, 2012 20:44:13 GMT -5
Yes you can u will have to drill out the 4 center intake bolt down holes and i put studs in because those are more of a angle then the 4 corners
|
|
|
|
Post by meatloaf65 on Mar 15, 2012 20:14:29 GMT -5
wat bout the distributor? all the plug wires run up to the front
|
|
|
|
Post by chevykillerx13 on Mar 18, 2012 3:33:14 GMT -5
I believe that you can swap many parts from an old small block on to the LT style. Some don't have a cut out on the block for a manual fuel pump though so you will have to check that. I had one that was supposed to be an lt from an early 90s truck and it had the cut out with a block off plate, then I had one from a Camaro, and it did not. and yes, you can use an old style intake, but as said before the inner bolts don't line up. either drill them out, or just put older heads on it. As for the distributor, id order one from summit just to be safe.
|
|
|
|
Post by chevyman422 on Mar 31, 2012 0:04:32 GMT -5
lt1 has a reverse cooling system if im not mistaken
|
|
oldtrx
Feature Winner
Posts: 109
|
Post by oldtrx on Apr 17, 2012 19:01:33 GMT -5
any pics of intake modifications? id like to see what has to be driled out
|
|
