|
|
Post by postalmopar67s on Apr 10, 2012 0:52:53 GMT -5
We are now offering quality driveline brakes at a competitive price. We currently have driveline brakes for three different rearends, the GM 14 bolt, Dana 60 , and Ford 9 inch. Prices for all three are the same, brake bracket and rotor $150; brake bracket, rotor and yoke $260; brake bracket, rotor, yoke, caliper and brake pads $315. GM 14 Bolt     Dana 60 Bolts to Raptor Fab truss/ back brace   Ford 9 Inch     We can be contacted at Scott 402-843-6157 postalmopar67s@gmail.com Matt 308-379-5979 pminematt@gmail.com We will be at Husker Havoc and also Metal Mayhem. Thanks for looking |
|
|
|
Post by David Bryan on Apr 12, 2012 0:47:52 GMT -5
Hello. Very nice.
Now, is that a UDP back brace? Looks alot like theirs.
Is this who you use? Or is this a copy?
Is it a copy of a copy? Hard to tell.
The 14 bolt brace looks alot like one I seen once.
Is that a copy as well?
A copy of one that is now being copied?
As I write?
Hard to tell.........
|
|
|
|
Post by postalmopar67s on Apr 13, 2012 1:40:18 GMT -5
David, No, it is not a UDP back brace/ truss. Notice all the holes are being used. Also I've had some questions about what the four holes in the bottom of our 14 bolt and 9 inch brake brackets are for. We put these four holes in the botton of the bracket so a builder/ driver can build a skid plate off the bottom of their housing and bolt to the brake bracket. We will be building these skid plates/ rotor protectors sometime in the future. Here is a picture of a GM 14 bolt that has a skid plate and also a better picture of the brake bracket on the rearend. This 14 bolt is also for sale at Spring Explosion if anyone is interested in it. It is a complete rearend, ready to go. Call Matt if interested, or just find him and check it out.   Thanks Scott |
|
|
|
Post by hemi on Apr 13, 2012 10:30:26 GMT -5
just curious if ya make the driveline brake for the mopar 8 3/4 rearend ?
|
|
|
|
Post by dude25J on Apr 17, 2012 11:24:54 GMT -5
Those look great! Glad to see a 14 bolt being built.
|
|
|
|
Post by postalmopar67s on Apr 17, 2012 23:37:53 GMT -5
Hemi, no we don't offer an 8 3/4 driveline brake. However, we may in the future. Dude25j, yes we have been working on the GM 14 bolts for awhile now. We still have a complete 14 bolt from SE for sale. It's set up for coils or leafs.
Thanks
Scott
|
|
|
|
Post by ynotracing on Apr 20, 2012 17:42:17 GMT -5
I seen that rear and talked to the guys man that thing is a beast
|
|
|
|
Post by Mobley 0x on Apr 20, 2012 18:19:35 GMT -5
I seen that rear and talked to the guys man that thing is a beast Shoulda had to load and unload it. Pretty sure any plans I had for offspring are out the window. Tom |
|
|
|
Post by Fousek49 on Apr 20, 2012 22:02:17 GMT -5
Shoulda had to load and unload it. Pretty sure any plans I had for offspring are out the window. Tom We can all breathe a sigh of relief. |
|
|
|
Post by fetrow127 on Apr 23, 2012 12:20:24 GMT -5
Shoulda had to load and unload it. Pretty sure any plans I had for offspring are out the window. Tom We can all breathe a sigh of relief. LMFAO......... ;D |
|
|
|
Post by postalmopar67m on May 1, 2012 10:16:05 GMT -5
Ford 9" pinion brakes will ship this week. Thank you for those that have purchased them. We will also be vending at Husker Havoc so stop by and see us! We plan on attending Metal Mayhem as well. Thanks again to everyone! Matt McClure
|
|
|
|
Post by postalmopar67s on May 7, 2012 22:39:10 GMT -5
Hello,
There are more pictures of the ford 9 inch on the first post.
Thanks
Scott Bauer
|
|
|
|
Post by 911rob on May 11, 2012 16:32:50 GMT -5
14 bolt pinion brake came today, it's a nice piece. Thanks
Rob
|
|
|
|
Post by postalmopar67s on May 21, 2012 7:23:17 GMT -5
Thanks Rob,
We will see everyone at Husker Havoc in Lincoln.
|
|
gta7
Rookie
Posts: 1
|
Post by gta7 on Mar 20, 2013 21:07:18 GMT -5
How much is the truss kit?
|
|
