RULE ALERT!7/9 + 7/14 Vigo Co Fair,Terre Haute, IN

[DerbyMaMa]

The demos are Monday the 9th and Saturday the 14th. In my opinion the fairboard is paying out over $10,000 in purse at the county fair derbies that seems more than fair to me but I have the feeling if the car count comes up they will be willing to reward the drivers in the future

Read more: we-crash.proboards.com/index.cgi?board=east&action=display&thread=9583&page=7#ixzz1khLsRH4ZHere is the proposed purse modified $1200-600-300-200-100 compacts/trucks $600-300-200-100

Rules at www.kingofthederbies.com
same rules as 2011

As far as our truck rules go you must attach the cab to the bed. Any bumpers allowed (if homemade must be covered with a bumper skin as to look like a bumper). No split rims. Any 1/2-3/4 ton truck/suburban/bronco if using a 4x4 front driveshaft must be removed. You can attach a cage to the frame in 4 spots from 5" behind firewall to 6" behind cab, gas tank protectors cannot attach to the frame nor extend more than 24" behind cab. There can be no kickers to the distributor protectors (dash bar must be 5" behind firewall). You are allowed 4 4"x6" patches to repair frame BENDS on PRE-RAN trucks these are the only frame welds allowed (bumpers/engine to frame/cage/patches). All other car safety rules apply. Thanks and if there are any questions please call [phone] Moss or [phone] Dunn

[DerbyMaMa]

this thread has been linked to the 2012 IN state schedule thread

[DerbyMaMa]

bump

[38r]

So who all is going to come out for this show since it has got to be ten times better know with new promoters? There was alot of talk on that other site so just thought I would ask here on wesamash.

[305junior]

well boomer i think there might b a few junk Bent&Twisted cars at terre haute this year to help out the new promoters at terre haute and help to try and get this derby back to the way it use to b hopeing TE makes a big defference cant wait to c every body there this year

[csparks727]

Well moss are we gonna be able to bring out pre-run cars seam-welded all they way or just leave them at home?

[DerbyMaMa]

Mar 8, 2012 14:55:33 GMT -5 csparks727 said:

Well moss are we gonna be able to bring out pre-run cars seam-welded all they way or just leave them at home?

!!!!!!RULE ALERT!!!!!!
IF running a preran with welded seams......
YOU must grind from the A-arms to the firewall and as long as the seams are welded with a single pass under body top side ONLY will be allowed....THIS year ONLY.

[DerbyMaMa]

Jun 3, 2012 16:38:34 GMT -5 d30 said:

how about patches i got 1 car thats bent all 4 corners and behind the crush boxes so can i put 6 patches on it.seams welded infront of a arms not a full seam welded if thay can do that i should be able to put 6 patches on right?

You'd better just call Moss (317-507-8858) on that one .

[DerbyMaMa]

from Indian89.......There seems to be a misunderstanding about how to mount the bumper so to clarify If mounting shock to outside of frame bumper may only be welded to shock which may not travel past any natural curve of frame If shock is inside frame you may hardnose bumper We in no way will allow you to plate frame with shock If you have any questions please call with specifics

[DerbyMaMa]

from Indian89.......NO BACK WINDOW BARS!!!!!!!!! Chain or wire is fine. Body mount bolts need only to go through top layer of frame. Please don't cover holes.

[DerbyMaMa]

from Indian89.......NO BACK WINDOW BARS!!!!!!!!! Chain or wire is fine. Body mount bolts need only to go through top layer of frame. Please don't cover holes.

[DerbyMaMa]

from Indian89.......NO BACK WINDOW BARS!!!!!!!!! Chain or wire is fine. Body mount bolts need only to go through top layer of frame. Please don't cover holes.

[squig8s]

What time does this derby start?