dano19d
Rookie
Be vewy vewy quiet I'm hunting sadbaggers
Posts: 12
|
Post by dano19d on May 11, 2012 19:25:50 GMT -5
Can't decide if i should run it stock or build it...what's your take...and if i should build it got any tips this is my first ford so any help will be much appreciated...its a Town Car
|
|
|
|
Post by ~XXX~ on May 13, 2012 16:02:24 GMT -5
Im pretty sure the '98 was front wheel drive.
|
|
|
|
Post by drphiluponya55xr on May 13, 2012 17:04:14 GMT -5
/\x2
|
|
|
|
Post by sound227 on May 14, 2012 18:13:43 GMT -5
I would scrap it, and start with a better car... but if that is not an option, strip it and have fun. They are not very tough, so make your hits count. I saw one of these win a small, but tough, limited weld derby once... mostly because the strong cars ignored him and beat each other up so badly. Between fwd, unibody, and the large amount of vulnerable electronics/wires needed to keep it running, you will have your work cut out for you keeping it moving. Good luck regardless!
|
|
dano19d
Rookie
Be vewy vewy quiet I'm hunting sadbaggers
Posts: 12
|
Post by dano19d on May 14, 2012 20:46:08 GMT -5
Little bit of an oopsie there...its a 97 town car haha
|
|
|
|
Post by sound227 on May 15, 2012 6:03:01 GMT -5
Ha... Then yes, build it to the extent that your rules allow you to. Read through the crown vic section, and you will find everything you need to know. If you have any questions during your build, just PM me and I will get back to you.
|
|
