|
|
Post by derby1018 on May 17, 2012 21:26:13 GMT -5
I am going to be build my cavy and for my fuel tank ill use a boat tank. Last year i ran a corsica and ran my boat tank with a fuel pump and it seemed as almost that the PSI on the fuel pump was putting to much fuel to the motor, so to keep that from happening with this cavy what do i do? Pleas help
|
|
|
|
Post by corypatterson13 on May 17, 2012 21:57:59 GMT -5
I use the sending unit and pump that came with the car. The height of the sending unit is a half inch shorter the the boat tank. I usaually cut a 2 inch hole in the top of the boat tank drop in the sending unit use self-tapping screws to fasten it down with some RTV ultra black. Then i use the stock wiring harness.The larger steel line on the sending unit is the Fuel IN the center smaller steel line is the return line and the other small line is a breather.
|
|
