ZTR Derby Products 98+ Watts Conv. Kits [5/12 KY]

[ZTR09]

ZTR Demo Product's

98+ Watt's Link Conv. Brackets-

Steering Column's-

Bare Oil / Tranny Box's-


CALL US 937 408 7269


5/26 Bash For Cash

ZTR Derby Products will be there

PreOrders only

BASH 4 CASH
________________________________________________

ZTR 98+ Watts Link Conv. Brackets. To GM 10Bolt Rearend Or other's


ZTR Demo Products has put these to the test and puts less stress on the rear end, Our Brackets move up and down like a Normal car would Also you can set your ride height when ever you demand if your using all thread shocks or what ever you may prefer, Our setup is made from HD Material's for long time derby use and abuse.

-How Do are brackets Mount?
-Our brackets come with an aligning pin attached to the main plate there are 2 factory holes in the 98+ Package trays,Slide them in for easy use Also there are 3 Surrounding holes around the plates that will have to be Blown out in the package tray the Plates come drilled so the hard work is done.

-How the lowers Mount

The lowers mount in the hole in front of the hump they are factory on 98+ cars set the Mounting Bracket and Arm up next to the frame and slide the bolt in and there a Hole "Factory" you can stick a wrench up in & Stick a nut on it and tighten it down then weld the bracket to the frame Or if you wanna supply your own all thread,you can run it all the way threw the frame if u demand

-[Drilled] Or [Bushings]
When you order our brackets We Offer bushing setups "Only the upper" All lowers will remain Drilled,Personally after running them i prefer the Drilled Setup Over the Bushing.

-These are Mocked up on a GM 10Bolt rear end,Will work on nine inchs depending on witch upper ear setup you run worst case it you may have to trim a little off the bracket it's self

___________________________________________________
-HD- Complete setup everything you need to Convert from watts link to 10Bolt

Include's

Lower Weld on Bracket-
Set of Lower's-
Upper Brackets With Arms-

[Drilled] 155.00 + Shipping]
[Bushings] 190.00 + Shipping]

Smash It Promotions Apporved-
These areNOT Allowed at Derby Icon Shows
__________________________________________________

-HD- Complete set of Uppers

Include's

Complete Upper Mounting Assemblies-
No lower's-

[Drilled] 105.00 + Shipping
[Bushings] 135.00 + Shipping

Smash It Promotions Apporved-
These areNOT Allowed at Derby Icon Shows
__________________________________________________
DI Legal Brackets 1/4 backing plates

Includes 2 mounting brackets that accept a factory ford upper

-These come with 2 alignment pins for easy to use

***You will have to shorten them to length so your pitch in correct**

60.00 Upper Brackets
70.00 With Lower Mounting Brackets

______________________________________________________


HD 1/2 Sets with slots

Includes 2 mounting brackets that accept a factory ford upper

-These come with 2 alignment pins for easy to use

***You will have to shorten them to length so your pitch in correct***

Both Left and Right Mounting Bracket 85.00 + Shipping
HD Everything


HD Just upper's



HD 1/2 Set Slots




Bushing Setup Comes like everything above

____________________________________________________

Steering Column's For 80's + Fords

We do not weld the Hex or Spline on so you can adjust it to where you want and cut it off and weld it on to where you prefer

Includes-

-Splined Or Hex Quick Release No Wheel Included

-2 Heim Joints and 4 Jam Nuts

-4 Two Piece lockers

-Normal Oem Knuckle

-Slider

-Knuckle that Bolts to any 80+ Ford Box's

We also supply Gm Ends as well

[Hex] 185.00 + Shipping
[Splined] 195.00 + Shipping




________________________________________________

ZTR Bare ICE Oil & Tranny Boxes

We build to anysize Price depending on Sizes...You will have to drill your own holes for mounting what ever you may put in it.

We offer As of 8/6/2011

12X12X24 Boxes For only 125.00

Includes

-Box
-Lid
-Drain Plug
-2 Handles
-4 Leg Mounts



NEW PRODUCTS!!!

5/8" X 4" body bolts.. $2.00 pc.

1/4" weld in wheel spacers with small bolt ford and big bolt chevy pattern.. $11 pc.



also offering..

adjustable all-thread shocks with removable all-thread, adjustable from 11" on up!!! $40 a set!

[ZTR09]

2/25 Swap meet Columbia

[warpig98]

great product. don't build a 98+ without the ZTR brackets!!!

[mat45]

Do you have a picture of how the lowers mount? I know I have to trim a little off the package tray but I'm not sure on how the bolt goes into the frame. Do I cut a little out of the outside of the frame to get the washer and the nut in? Thanks

[ZTR09]

Matt shoot me a text i'll get yeah some number is below


937 408 7269

[ZTR09]

80+ Ford Crossmembers For SBC/Ford trannys Great for Slipshaft setups will never rub your yoke again! 55.00

[ZTR09]

We now sell All thread shocks 40.00 a Set

[ZTR09]

Pm's replyed and everything shipped to date

[Petro114]

[ZTR09]

Pm's replyed

We will be at the Muncie IND 4/21 Team show get your orders in

[ZTR09]

Pm's replyed

[doinit729style]

If I get a steering set-up at bash for cash, could you have me a wheel too or not? I would pay extra if you could get it.

[ZTR09]

Can have a wheel for 20 extra they are used but very nice cond.They are GT Grants

Must be prepayed a week before

[doinit729style]

Okay sounds good, send me a Pm with your mailing info and ill have it sent soon.

[cundiff2c]

will u have any steering columns at spring ex??