WINSLOW'S CUSTOM SHOP

[bulldog17w]

I accept paypal, money orders, checks.....pm me before sending money to make sure product is in

IF ORDERING MULTIPLE ITEMS I WILL DISCOUNT THE PRICE ACCORDINGLY.

Winslow Goodwin
912 N. Vine st.
abilene, ks. 67410

Paypal is: [e-mail]



### AUTO EJECT CAN CRUSHER $195 + 15 SHIPPING ###

Like it says after you crush your beverage can it auto ejects the can out the back!

### SOLID TIE RODS $145 + 15 SHIPPING ###

I can make these at any length for other applications. You have to drill or ream out your drag link, and spindles for the ends to fit. picture below shows a stock 80's ford compared to the heavier rod ends that mine use.

### MOTOR MOUNTS SBC IN 80 AND NEWER FORDS $55 + 11 SHIPPING ###

I'm now including 6" long bolts to mount these in the vic mount.. I ran this mount in my car and it works great.. no need to buy anything after you buy these mounts, because you use the stock lower ford mounts, and these mounts rest on the factory ford mounts, so not all the weight of the motor is resting on the bolt....with these mounts and a th350 the stock ford tranny crossmember lined up perfect with the th350 tranny mount this was a complete bolt in deal it works great...to use these mounts in bubble fords (92 and up) you'll have to use the ford bottom mounts from a box style ford (80-91)..

###BRAKE BOOSTER ELIMINATER PLATE $15 + 11 SHIPPING###

laser cut brake plates for 80 and newer fords... these have ovaled holes to accept chevy or ford master cylinders.. shipping $11 dollars up to 20 plates.. more shipping cost after that.

###WHEEL CENTER $15 + 11 shipping###

Now cutting wheel centers for 14"rims. They are smaller in overall diameter, so they fit better in the smaller rims. Wheel centers for 14" rims do not have the 5.5 bolt pattern.

laser cut centers with 4.5, 4.75, 5, and 5.5 bolt patterns
shipping $11 dollars up to 20 plates.. more shipping cost after that

### DRIVE LINE BRAKES ###

10 BOLT GM $200 + 20 SHIPPING

MOPAR 8.75 $225 + 15 SHIPPING

FORD 9" $235 + 15 SHIPPING

DANA 60 $255 + 20 SHIPPING

I built my first one and ran it on my car, and it works great...I've ran with just this brake, and it will lock the rear as fast as you step on the pedal!! It's awesome being able to lock the rear tires right when you want. I've also ran with this brake and front brakes hooked up which also works great..just think no more bent broke drum brakes on the rear, wheel can be bent bad and still not rub on anything...

I'm only going to sell the fabricated parts which include the new one piece yoke, the lathed and drilled rotor, and the caliper bracket. the 10 bolt gm brake is the only one that doesn't include a yoke, but it does include a bushing to install with the rotor. dana 60 and 10 bolt gm utilize the same caliper bracket, but have different mounting tabs that are welded to your rear end.

I'll include a parts list for the new parts that you buy locally.. the caliper, brake pads, and brake hose...are the parts you will get locally. If those are all bought new it would come to around $100. I also include make and model of cars, so you could buy used caliper, and if you took it off you'ld have the hose, and needed hardware with it and probably spend 20-30 dollars from a yard....

### GM HEI IN A 318/360 SBM $30 + 5 SHIPPING ###

THIS BUSHING ALLOWS A STOCK BUICK HEI (WITH VERY MINOR WORK) FIT IN A SMALL BLOCK CHRYSLER 318, 360... THE THING THAT MAKES THIS NICE IS ANYONE CAN GET ANOTHER BUICK DIST. PRETTY EASILY IF IT EVER GETS HURT, BENT, BROKE, AS OPPOSED TO TRYING TO GET ANOTHER DIST. WELDED TO FIT YOUR SBM...

I MADE ONE OF THESE FOR MYSELF ABOUT THREE YEARS AGO WHEN LOCAL RULES SAID YOU HAD TO HAVE SAME ENGINE AS CAR, SO I BUILT A 318 FOR MY SHOCKERS AND WANTED AN HEI.. I BOUGHT ONE OF THOSE WELDED TOGETHER DISTS. AND THEY HAD IT JUST A LITTLE OFF SO THE PICKUPS IN THE DIST. WOULDN'T MAKE CONTACT JUST RIGHT... SO I BUILT THIS BUSHING TO FIT THE STOCK BUICK DIST. SO THAT EVERY THING WOULD WORK PROPERLY, AND EASY ACCESS TO REPLACE PARTS ON A STOCK BUICK IF NEEDED...

THESE BUSHINGS ARE CNC MACHINED, AND ALSO HAVE THE OIL O-RING GROOVE IN THEM, SO YOU WON'T LEAK ANY OIL....$35 A PIECE .... THAT INCLUDES SHIPPING TO YOUR DOOR....

###SB CHEVY OR SB MOPAR DISTRIBUTOR GUARD & GAS PEDAL $225###

I've had mine for years and absolutly love the design with the dist. guard and gas pedal all in one product. I also make a plate that allows you to run just the gas pedal for shows that don't allow guards. This guard fits best with stock intakes.. if you run an alluminum intake you might have to modify the intake plates a little bit. THIS IS THE SAME FOR CHEVY, AND MOPAR GUARDS

I will sell the gas pedal assembly seperate with its own plate (which has the same bolt pattern as the guard so you can use the gas pedal both ways) for $125 + shipping. that can be bolted to the transmission without the guard (for derbys that don't allow guards)


$225 for the guard and gas pedal complete, which comes with the linkage rod, and all hardware.
$125 for just the guard.
$125 for the pedal setup with plate.

Shipping on this varies on location, but anywhere from 25-35 has been the average shipping cost....

[cheater111]

How much for the aluminum tank and 4 wheel centers shipped to 72143.

[bulldog17w]

Pm sent.

[duck8x]

Can u mes me your number would like to talk to u about orderin several things

[duck8x]

Great products. Fast shipin. Would recommend. To any one

[kalel33]

Which drive line brake would go on a gm 12 bolt?

[bulldog17w]

Jul 17, 2012 5:32:18 GMT -5 kalel33 said:

Which drive line brake would go on a gm 12 bolt?

10bolt with a little modification.