Post by fullthrottle5060 on Jun 11, 2012 20:58:19 GMT -5
GRANT COUNTY 4-H FAIR GROUNDS
JUNE 23
GATES OPEN 4
DERBY STARTS @ 7
ENTRY FEE- $25.00
PIT PASS $10.00
INFO JOHN SHROUT 765-251-0857
FULL SIZE MOD RULES:
FRAMES:
1. No concrete in frames or nothing in frame.
2. You can weld frame seams but NO plating unless it’s bent.
3. You can pitch your frames & weld washers to frame for body bolts.
4. You can pin your frames in no more than 6 spots.
5. Rear humps may be plated 22” inch’s in length with contour of frame & on outside only.
6.Rust damage may be repaired with the same size metal. No more than 1” overlap.
ENGINES:
1. Engines and transmissions may be interchanged.
2. Motor mounts may be welded.
3. Transmissions and oil coolers allowed.
4. Battery’s must be relocated, you can use 2 {12 volt} batteries covered & fastened securely.
5. Fuel cells must be mounted securely behind driver’s seat and covered.
6. All fuel lines must be ran were they will NOT be cut or pinched.
TIRES:
1. Any tires, doubled, screws in rims, valve stem protectors will be allowed!
2. All wheel weights MUST be removed!
REARENDS:
1. 8 lug rear-ends are permitted {NO DUALS}
CAGES:
1. A 6 point cage is ok {NO cage in the doghouse & trunk!!}with exception to rule 4
2. Can weld cage to frame.
3. A gas tank protector is allowed
4. Kickers are allowed {BEHIND} A-ARMS…..
PROTECTORS:
1. Distributor, Gas, Pulleys, Carburetor, ALLOWED!!!
TRUNK:
1. Welding, tucking, and wedging is allowed you will need 12” hole to see in trunk during Inspection.
BUMPERS:
1. Any automotive bumpers allowed {may be loaded} on inside of bumpers.
2. Can weld all factory brackets, shocks, seams.
SUSPENSION:
1. May strengthen A-arms, tie rods, and steering.
2. Car does not have to bounce!!
3. You are allowed trailing arms to leaf conversions.
4. NO FLAT SPRUNG CARS!!!
5. 5 leaf max stock leaf package.
FUELS:
1. You are allowed any fuel combination
All officials’ decisions are final!!!!
MINI STOCK
1. 105 ½ wheel base
2. 4 & 6 cylinder motors only
3. Completely stock bodies & any stock auto bumper may be used can be welded or bolted on
4. Electric fuel pumps must have a shut off switch on inside of driver’s area gas tanks can be left in stock postition if in front of rear axle
5. Halo cage is allowed.
6. No unibody seam welding unless bent
7. Can patch if bent with same thinkness of factory metal
8. Any Tire Will Be Allowed
9. Can weld doors 6” inches on 6” off
10. Hood must have a 12” inch hole cut in them hood can be bolted or wired
11. Preferably a roof sign 24” long with bright numbers
12. Wire or strap in windshield from roof to cowl.
13. Trunks can be welding 6" on 6" off must have a 12" hole cut in it
NO LOADING OF FRAME RAILS
Mod Mini’s
1. This is a full weld class
2. Any auto bumper front and rear is allowed
3. 108in wheel base max... V4-v6-v8 motors in mod class
4. Front wheel & Rear wheel drive will be allowed in this class.
5. Roll cages are allowed and rollover bar
6. Any tire or double tires will be allowed
7. Hood and trunk can be bolted
8.”NO” Protruding bars on outside of vehicles.
Also will be running Trucks!!!!
Call for details
FULLSIZE MOD
$1000 TO WIN
MINI MOD
$800 TO WIN
STOCK MINI
$500 TO WIN
JUNE 23
GATES OPEN 4
DERBY STARTS @ 7
ENTRY FEE- $25.00
PIT PASS $10.00
INFO JOHN SHROUT 765-251-0857
FULL SIZE MOD RULES:
FRAMES:
1. No concrete in frames or nothing in frame.
2. You can weld frame seams but NO plating unless it’s bent.
3. You can pitch your frames & weld washers to frame for body bolts.
4. You can pin your frames in no more than 6 spots.
5. Rear humps may be plated 22” inch’s in length with contour of frame & on outside only.
6.Rust damage may be repaired with the same size metal. No more than 1” overlap.
ENGINES:
1. Engines and transmissions may be interchanged.
2. Motor mounts may be welded.
3. Transmissions and oil coolers allowed.
4. Battery’s must be relocated, you can use 2 {12 volt} batteries covered & fastened securely.
5. Fuel cells must be mounted securely behind driver’s seat and covered.
6. All fuel lines must be ran were they will NOT be cut or pinched.
TIRES:
1. Any tires, doubled, screws in rims, valve stem protectors will be allowed!
2. All wheel weights MUST be removed!
REARENDS:
1. 8 lug rear-ends are permitted {NO DUALS}
CAGES:
1. A 6 point cage is ok {NO cage in the doghouse & trunk!!}with exception to rule 4
2. Can weld cage to frame.
3. A gas tank protector is allowed
4. Kickers are allowed {BEHIND} A-ARMS…..
PROTECTORS:
1. Distributor, Gas, Pulleys, Carburetor, ALLOWED!!!
TRUNK:
1. Welding, tucking, and wedging is allowed you will need 12” hole to see in trunk during Inspection.
BUMPERS:
1. Any automotive bumpers allowed {may be loaded} on inside of bumpers.
2. Can weld all factory brackets, shocks, seams.
SUSPENSION:
1. May strengthen A-arms, tie rods, and steering.
2. Car does not have to bounce!!
3. You are allowed trailing arms to leaf conversions.
4. NO FLAT SPRUNG CARS!!!
5. 5 leaf max stock leaf package.
FUELS:
1. You are allowed any fuel combination
All officials’ decisions are final!!!!
MINI STOCK
1. 105 ½ wheel base
2. 4 & 6 cylinder motors only
3. Completely stock bodies & any stock auto bumper may be used can be welded or bolted on
4. Electric fuel pumps must have a shut off switch on inside of driver’s area gas tanks can be left in stock postition if in front of rear axle
5. Halo cage is allowed.
6. No unibody seam welding unless bent
7. Can patch if bent with same thinkness of factory metal
8. Any Tire Will Be Allowed
9. Can weld doors 6” inches on 6” off
10. Hood must have a 12” inch hole cut in them hood can be bolted or wired
11. Preferably a roof sign 24” long with bright numbers
12. Wire or strap in windshield from roof to cowl.
13. Trunks can be welding 6" on 6" off must have a 12" hole cut in it
NO LOADING OF FRAME RAILS
Mod Mini’s
1. This is a full weld class
2. Any auto bumper front and rear is allowed
3. 108in wheel base max... V4-v6-v8 motors in mod class
4. Front wheel & Rear wheel drive will be allowed in this class.
5. Roll cages are allowed and rollover bar
6. Any tire or double tires will be allowed
7. Hood and trunk can be bolted
8.”NO” Protruding bars on outside of vehicles.
Also will be running Trucks!!!!
Call for details
FULLSIZE MOD
$1000 TO WIN
MINI MOD
$800 TO WIN
STOCK MINI
$500 TO WIN
