Post by ZTR09 on Feb 16, 2012 18:58:25 GMT -5
Radiators
Standard 31x19 and have a 28x19 spare if core support is twisted. Get them from www.speedwaymotors.com
Sent from my ADR6300 using ProBoards
I also use 31x19 and 28X19 radiators. I get mine from DEC.
DEC Headers has TRU-KOOL radiators for $120.00 are they good and is that a good price
Been using a 28X19 DEC rad for 3 years with no problems. Just make sure you build a good rad protector if allowed. Gave my spare to a buddy and he won with it.
Tire Sizes
What size tires are you guys running in the rear and front of your crown vics?
i run 15's all around
depends on how you run your car....Really Low assend 23x8.50x14 Skidsteers. Low assend 14" STA's. Some guys like the 27x8.50x15 Skidsteers too.
Most guys have been running 7.00-15's on the fornt till the front comes toward the crush box then they go smaller like a 5.50-15 or a 7-14.5 trailer tire.
Thanks Buzz I run shows that dont allow hump plates. Would the 23x8.50x14 or the 27x8.50x15 be too wide if the humps blow out?
really depends on how you do your suspension and the tilt
If you cannot run hump plates....beat the humps in so they are concave and it takes longer for the to blow out.
Sent from my ADR6300 using ProBoards
Tire Sizes
Most guys have been running 7.00-15's on the fornt till the front comes toward the crush box then they go smaller like a 5.50-15 or a 7-14.5 trailer tire.
