Dana 60 convert to coils

[mkvien]

I am patiently waiting for someone to make a "kit" to do this, or at least the UCA mounts. I think a plate that bolts onto the rear of the housing between the cover and the center section, with mounts welded onto it, would be a nice item. Installed in minutes and should be plenty strong. Maybe I will get impatient and do it myself.

[mkvien]

Unless someone happens to have a print of the cover bolt pattern, maybe then I would just laser cut a plate out and do it myself, anyone have one?

[TommyGun]

Something like this should work? There is a ton of parts out there for these rearends. Check out some 4x4 sites and you will find a lot of good info on them. EDIT- I think raptorfab could set you up with whatever you need.

www.currieenterprises.com/cestore/images/product//currie/60-7100.jpg

[mkvien]

Mar 13, 2012 9:19:23 GMT -5 TommyGun said:

Something like this should work? There is a ton of parts out there for these rearends. Check out some 4x4 sites and you will find a lot of good info on them. EDIT- I think raptorfab could set you up with whatever you need.

www.currieenterprises.com/cestore/images/product//currie/60-7100.jpg

You are right, there is a lot of stuff out there, I have looked. There really isn't a lot for stock style arms (most use red-ends), and the costs are pretty high on a lot of the stuff.